This article describes how to uninstall hardware and printer drivers in Windows 10 and 11. Whenever you connect a new device to your computer, Windows tries to automatically find and download (or update) the appropriate drivers via Windows Update. Over time, this could result in a large number of unused driver files being stored in the C:\Windows\System32\DriverStore directory.

There are several ways to remove a driver from the Windows driver repository (DriverStore).

How to Completely Remove a Print Driver from Windows

Even if you have removed a printer from Windows using the Control Panel, its driver still remains installed on your computer. To completely uninstall printer drivers in Windows, follow the steps below.

1. Open the Print Management Console printmanagement.msc (if it’s not installed on your computer, you can install it from RSAT using the command: dism /Online /add-Capability /CapabilityName:Print.Management.Console~~~~0.0.1.0 );
2. Go to Print Manager -> Print Servers -> your computer -> Drivers;
3. All installed printer drivers are listed here. Click on the driver you want to uninstall and select Remove driver package;

You can also remove unused drivers from the print server properties. To do this, run the command printui /s /t2, select the printer driver, then click Remove and select Remove driver and driver package.

Using Device Manager to Uninstall Drivers in Windows

Before uninstalling any driver, you must disconnect any devices that may use it. Once that’s done, you can proceed with the following steps:

1. Open the Device Manager console (devmgmt.msc);
2. Go to the View section and enable the Show hidden device option;
   This mode allows you to remove hidden (ghost) network adapters.
3. Now find your device in the list, right-click on it, and select Uninstall device;
   If there is no driver installed for the device, it will show up in the Device Manager with a yellow exclamation mark. Here are the instructions for finding a driver for an unknown device in Windows.
4. To remove both the hardware and the driver from the driver storage, check the option Delete the driver software for this device, then click Uninstall.

Remove the Device Driver Using the Windows Command Prompt

To list the third-party drivers installed in Windows, run the command:

pnputil /enum-drivers

or

dism /online /get-drivers /format:table

This way, you get to see both the INF file name under which the driver is installed in the repository (Published name in oem#.inf format) and the Original File Name.

Find the required driver in the list and remember the file name (in oem#.inf format). To uninstall the driver, run the following command at a command prompt:

pnputil /delete-driver <Published Name> /uninstall /force

For example,

pnputil /delete-driver oem15.inf /uninstall /force

If you cannot uninstall the driver from the online Windows image, you can try uninstalling it from an offline image.

Boot your computer into the Windows Recovery (WinRE) or WinPE environment. List the drivers in the offline Windows image:

Failed to delete driver package: The specified file is not an installed OEM INF.

Or specify the path to the INF file manually::

DISM /Image:C:\ /Remove-Driver /Driver:<inf_file_full_path>